Kids’ Moderate/High Intensity Field Hockey Shin Guard Kiddy

Designed for kids playing at moderate to high intensity; intermediate or advanced players will choose this shinguard; also suitable for beginner playersFull coverage field hockey shinguard: covers the sides of the legs and ankles. Slips on under a hockey sock.

Detailed description

Thermoplastic polypropylene plastic shells covering the front of the leg and malleolus in just one piece. Lined with EVA foam covered with fabric on the side in contact with the leg and malleolus. The outer side of the shell is also lined with fabric. Maximum vertical coverage. Flexible shell adjusts easily to the leg. Two elastic tightening straps with velcro closures at the front. Not asymmetrical.

Weight

200 g per pair in size XXS

Which size?

“Place the shin guard as low as possible on your leg so that your ankles are well covered (make sure there are no pressure points and your ankle can move freely). Ideally, the top of the shin guard should come to 2 cm below your kneecap. Your shin guard should fit snugly around your calf without being too tight.

Which size?(cont.)

Manufacturer’s information:
– you are 98 cm or less -> size 3XS
– 98 to 116cm -> 2XS
– 116 to 134cm -> XS

Safety tips

Hockey should be fun. Don’t neglect your safety. Always wear your mouthguard, shin guards and a glove. Use hockey shoes with protective reinforcement and soles designed for your playing surface.Wear a mask and specially designed gloves. During matches and training.

Protecting your legs

A shin guard is a piece of personal protection equipment. It should meet current regulations, including the PPE regulation (EU) 2016/425.
Use a shin guard that was specifically designed for field hockey. A field hockey shin guard has two features specific to the sport: it covers the ankles and comes up to just beneath the kneecap, and provides wide coverage around the legs.

Protecting your legs(cont.)

Football shin pads are not suitable for field hockey.
A field hockey shin pad features a moulded plastic plate that is generally lined with foam to absorb impacts.
Replace your shin guard according to the manufacturer’s indications or as soon as it begins to show signs of wear. Refer to the product user guide in case of questions.

Information

The information here was provided by the manufacturer or observed by our teams from samples received from the manufacturer.

Care advice

Brush off and wipe down your shin guard with a damp cloth. If the lining can be removed and washed, refer to the care instructions to do so. Allow to air dry.

Sizes

XXXS | XXS | XS |